Does a washing machine need a P-trap on the drain line? | Always | 76% | In most cases | 4% | In some cases | 10% | Never | 4% | Not sure | 4% | | | Question: Does a washing machine need a P-trap on the drain line? Top Answer (76% of 46 votes): Always.
Answer: Always Explanation: Prevents sewer gases from entering your home by creating a water seal in the drain line.
Traps debris to help prevent clogs from reaching the main drain line.
Required by plumbing code in virtually all jurisdictions.
Code Requirements:
The P-trap must be properly vented (typically with an air admittance valve or a vent stack) to allow for proper drainage and prevent siphoning.
It must be located above the floor (not underground) and typically within 30 inches of the standpipe or washer connection.
The standpipe (vertical section of pipe where the washer drains) is also required and usually must be 18 to 30 inches tall.
Common Setup
Washing machine drains into a standpipe.
The standpipe connects to a P-trap.
The P-trap connects to the main drain line and has a vent.
If you're installing or inspecting a washer setup and there's no P-trap visible, it's either a code violation or hidden inappropriately both of which should be corrected. | Prime Plumbing | Answer: Always Explanation: Cofe | Gpc | Answer: Always Explanation: The only one that does not need P-trap installation is the toilet because they come with a P-trap built-in already. Kitchen Sink, Shower, Bathroom Sink, washing machine, all of them need a P-trap | Miami 305 Plumbing | | ProMatcher | Answer: Always Explanation: Any plumbing fixture with a drain needs a P-trap installed to prevent sewer gasses from entering the home. | SDL Plumbing Inc. | Answer: Always Explanation: The P-trap keeps sewer gasses from exiting the drain line. | EVERYDAYPLUMBER.com | Answer: Always Explanation: the P-trap will be installed typically below you floor and it is needed to prevent the sewer gas from coming uo through the drain and in some cases into the washer itself | DripDrop LLC | | ProMatcher | Answer: Always Explanation: Yes every plumbing fixture requires a trap before it connects to the building drainage system to keep harmful gas from escaping into the room. | Plumbing Professionals | Answer: Always Explanation: The trap prevents sewer gases from escaping the pipe and causing a dangerous situation. | Extreme Extraction and Decontamination llc | Answer: Always Explanation: All drains require p-traps. | Company name here | | ProMatcher | Answer: In some cases Explanation: If draining into sewer or septic systems | John's Appliance Installations | Answer: In some cases Explanation: Direct drain line to main | Lobocos Handyman Service |
|